NSN 3UJF8

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

200.000 feet nominal length, 0.0040 inches nominal base material thickness, silver precious material, plastic polyester material, black and white emulsion type.

NSN 6750-01-420-5346 Datasheet

(NSN) National Stock Number

6750-01-420-5346

(FSG) Federal Supply Group

67 - Photographic Equipment

(FSC) Federal Supply Classification

6750 - Photographic Supplies

(NIIN) National Item Identification Number

01-420-5346

Requires Demilitarization

Yes

(INC) Item Name Code

30432

Date

Thu, Oct 19, 1995

Schedule B Code

9010100000

Base Material Thickness

0.0040 inches nominal

Emulsion Type

black and white

Length

200.000 feet nominal

Material

plastic polyester

Precious Material

silver

Reproduction Type

negative

Usage Form

roll

Width

30.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0030432

Cross Reference

CAGE Codes

1BB84

Bayer Corp Agfa Div Electronic Imaging/ Photographic Supplies

U.s./canadian manufacturers

Freight Information

Air Commodity

PZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

H - Subject to damage from heat

Uniform Freight Classification Item Number

19845

Water Commodity

759 - Film and photo paper, other than motion picture (see 716 and 717)

National Motor Freight Classification Item Number

039655

Schedule B & Trade

Schedule B

9010-10-0000

Description

apparatus & equipment, automatically developing photographic film/paper in rolls, automatically exposing developing film to roll of photographic paper

End Use

21190 - Photo, service industry machinery

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

88135

(NAICS) North American Industrial Classification System

333310

Questions & Answers

1. What is the FSCG of the NSN 6750-01-420-5346?

   The FSCG of the NSN 6750-01-420-5346 is 6750

2. Does the NSN 6750-01-420-5346 have a Schedule B code assigned?

   Yes, the Schedule B code is 9010100000

3. Does NSN 6750-01-420-5346 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6750-01-420-5346 contain precious materials?

   Item contains silver.

5. Does NSN 6750-01-420-5346 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6750-01-420-5346 was assigned to the Federal Catalog?

   It was assigned 30 years ago, on Thu, Oct 19, 1995