NSN 403568017

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

compression nut connector cable strain relief method, straight shape, internal coupling body style, internally threaded coupling nut connector locking method, qq-c-530,comp a fed spec single material response single mating end single contact grouping contact material document and classification, 0.143 inches minimum and 0.145 inches maximum cable entrance diameter.

NSN 5935-00-008-8335 Datasheet

(NSN) National Stock Number

5935-00-008-8335

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-008-8335

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Sun, Jul 23, 1972

Schedule B Code

8536695050

Body Style

straight shape, internal coupling

Cable Entrance Diameter

0.143 inches minimum and 0.145 inches maximum

Connector Cable Strain Relief Method

compression nut

Connector Locking Method

internally threaded coupling nut

Contact Material Document And Classification

qq-c-530,comp a fed spec single material response single mating end single contact grouping

Contact Material

copper alloy single mating end single contact grouping

Contact Position Arrangement Style

sm single mating end

Contact Removability

removable single mating end single contact grouping

Contact Surface Treatment

gold single mating end single contact grouping

Environmental Protection

moisture resistant and salt water resistant and vibration resistant

Included Contact Quantity

1 single mating end single contact grouping

Included Contact Type

coaxial pin single mating end single contact grouping

Insert Material

plastic tetrafluoroethylene single mating end

Mating End Quantity

1

Nominal Thread Size

0.250 inches

Overall Diameter

0.400 inches maximum

Overall Length

0.330 inches maximum

Precious Material And Location

contact surfaces gold and shell surface silver

Precious Material

gold and silver

Radio Frequency Type Contact Characteristic Impedance In Ohms

50.0 single mating end single contact grouping

Shell Material

copper alloy

Shell Surface Treatment

silver

Shell Type

solid

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

36

Thread Series Designator

uns

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

06KW9

Lucent Technologies Inc Dba Federal Marketing Group

U.s./canadian manufacturers

3B4M0

Lucent Technologies Inc Corporate Headquarters

Non-manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

98291

Itt Cannon Rf Products

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-008-8335?

   The FSCG of the NSN 5935-00-008-8335 is 5935

2. Does the NSN 5935-00-008-8335 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-008-8335 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-008-8335 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-00-008-8335 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-008-8335 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Sun, Jul 23, 1972