NSN 4065693A

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes:flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes:disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

end radius first leg style, 0.216 inches minimum and 0.226 inches maximum first leg hole diameter, 0.043 inches minimum and 0.055 inches maximum center section thickness, one hole first leg hole arrangement style, 1.420 inches minimum and 1.450 inches maximum center section height.

NSN 5340-01-215-1430 Datasheet

(NSN) National Stock Number

5340-01-215-1430

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-215-1430

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Thu, Aug 22, 1985

Center Section Height

1.420 inches minimum and 1.450 inches maximum

Center Section Thickness

0.043 inches minimum and 0.055 inches maximum

First Leg Hole Arrangement Style

one hole

First Leg Hole Diameter

0.216 inches minimum and 0.226 inches maximum

First Leg Style

end radius

First Leg Thickness

0.043 inches minimum and 0.055 inches maximum

Material Document And Classification

ams 4911 assn std single material response

Material

titanium alloy uns r56400

Mounting Hole Type

plain

Second Leg Angle

90.0 degrees nominal

Second Leg Hole Arrangement Style

one hole

Second Leg Hole Diameter

0.216 inches minimum and 0.226 inches maximum

Second Leg Relationship To First Leg

not identical

Second Leg Style

end radius and tapered

Second Leg Thickness

0.043 inches minimum and 0.055 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

03730

Gould E a and Co

U.s./canadian manufacturers

77445

Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney

Non-manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

68455

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

136500

Questions & Answers

1. What is the FSCG of the NSN 5340-01-215-1430?

   The FSCG of the NSN 5340-01-215-1430 is 5340

2. Does NSN 5340-01-215-1430 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-215-1430 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-215-1430 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-215-1430 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Thu, Aug 22, 1985