NSN 4084-0001

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

angle shape, external coupling body style, unable to decode contact material, unable to decode contact position arrangement style, externally threaded shell connector locking method, 0.500 inches nominal center to center distance between mounting facilities parallel to length.

NSN 5935-00-869-1069 Datasheet

(NSN) National Stock Number

5935-00-869-1069

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-869-1069

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Fri, Jan 1, 1960

Schedule B Code

8538907080

Body Style

angle shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Length

0.500 inches nominal

Connector Locking Method

externally threaded shell

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Surface Treatment

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.500 inches nominal

Distance From Mounting Shoulder To Rear Face

1.250 inches nominal

Environmental Protection

weatherproof

Flange Length

0.686 inches nominal

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Mating End Quantity

1

Nominal Thread Size

0.4375 inches and 0.099 inches

Overall Height

1.938 inches nominal

Overall Length

1.281 inches nominal

Overall Width

0.686 inches nominal

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material

gold and silver

Precious Material And Weight

0.005 gold grains, troy and 0.005 silver grains, troy

Radio Frequency Type Contact Characteristic Impedance In Ohms

unable to decode

Shell Material

copper alloy

Shell Surface Treatment

silver

Shell Type

solid

Special Features

contact designation tnc

Terminal Location

unable to decode

Terminal Type

unable to decode

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Quantity Per Inch

28 and 56

Thread Series Designator

unef and unf

Threaded Device Type

coupling facility and mounting hole

Unthreaded Mounting Hole Diameter

0.099 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

00752

L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products

U.s./canadian manufacturers

95077

Sv Microwave, Inc. Div Sv Microwave

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-00-869-1069?

   The FSCG of the NSN 5935-00-869-1069 is 5935

2. Does the NSN 5935-00-869-1069 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-00-869-1069 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-869-1069 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-00-869-1069 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-869-1069 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960