NSN 40D2153

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

straight shape, external coupling body style, unable to decode contact position arrangement style, 0.718 inches nominal center to center distance between mounting facilities parallel to height, externally threaded shell connector locking method, unable to decode contact material.

NSN 5935-01-061-2904 Datasheet

(NSN) National Stock Number

5935-01-061-2904

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-061-2904

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Fri, Jun 16, 1978

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

0.718 inches nominal

Connector Locking Method

externally threaded shell

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.718 inches nominal

Distance From Mounting Shoulder To Front Face

0.562 inches nominal

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Size

0.625 inches

Overall Height

1.000 inches nominal

Overall Length

1.078 inches nominal

Overall Width

1.000 inches nominal

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces silver

Precious Material

silver

Precious Material And Weight

0.005 silver grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,type 2,class 3 fed spec all treatment responses

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium and chromate

Shell Type

solid

Terminal Location

unable to decode

Terminal Type

unable to decode

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

24

Thread Series Designator

unef

Threaded Device Type

coupling facility

Unthreaded Mounting Hole Diameter

0.120 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

25140

Globe Motors, Inc. Dba Allient Dayton

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-061-2904?

   The FSCG of the NSN 5935-01-061-2904 is 5935

2. Does the NSN 5935-01-061-2904 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-061-2904 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-061-2904 contain precious materials?

   Item contains silver.

5. Does NSN 5935-01-061-2904 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-061-2904 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Fri, Jun 16, 1978