NSN 4118740-53

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

copper alloy single mating end single contact grouping contact material, angle shape, w/o cable clamp body style, nonremovable single mating end single contact grouping contact removability, internally threaded coupling ring connector locking method, 90.0 body angle in deg.

NSN 5935-00-843-2539 Datasheet

(NSN) National Stock Number

5935-00-843-2539

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-843-2539

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Mon, Jan 1, 1962

Schedule B Code

8536695050

Body Angle In Deg

90.0

Body Style

angle shape, w/o cable clamp

Connector Locking Method

internally threaded coupling ring

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

nonremovable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

900.0 single mating end single contact grouping

Contact Maximum Current Rating In Amps

22.0 single mating end single contact grouping

Contact Maximum Dc Voltage Rating In Volts

1250.0 single mating end single contact grouping

Contact Position Arrangement Style

20-4 single mating end

Contact Surface Treatment Document And Classification

mil-g-45204,ty 1,grade b mil spec 1st treatment response and qq-n-290,cl 1,grade b fed spec 2nd treatment response single mating end single contact grouping

Contact Surface Treatment

gold and nickel single mating end single contact grouping

Distance From Centerline To Cable End

1.969 inches maximum

Distance From Centerline To Connector End

2.305 inches nominal

Environmental Protection

moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof

Features Provided

pre-tinned terminal

Included Contact Quantity

4 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Material

rubber single mating end

Insert Position In Deg

45.0

Mating End Quantity

1

Nominal Thread Length

0.290 inches and 0.375 inches

Nominal Thread Size

1.188 inches and 1.250 inches

Operating Temp Rating

-55.0 celsius minimum and 125.0 celsius maximum

Overall Diameter

1.890 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.004 gold grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec all treatment responses

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium and chromate

Shell Type

solid

Specification/Standard Data

96906-ms3108 government standard

Terminal Location

back single mating end single contact grouping

Terminal Type

solder well single mating end single contact grouping

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Threaded Device Type

back shell and coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

82577

Raytheon Company Dba Raytheon

Non-manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

5 - Low sensitivity, category iv, aa&e, unclassified

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-843-2539?

   The FSCG of the NSN 5935-00-843-2539 is 5935

2. Does the NSN 5935-00-843-2539 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-843-2539 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-843-2539 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-843-2539 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-843-2539 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962