NATO Stock Number
5905-00-134-0426
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
2
Body Style
Cylindrical servo mounted
Reliability Indicator
Not established
Pilot Diameter
1.5620 inches
Pilot Length
0.0620 inches
Overall Length
2.230 inches
Undercut Diameter
1.750 inches
Undercut Width
0.0780 inches
Body Diameter
1.767 inches
Shaft Diameter
0.125 inches
Shaft Length
0.562 inches
Body Length
0.977 inches
Overall Diameter
2.120 inches
Mounting Lip Diameter
1.7670 inches
Mounting Lip Depth
0.0930 inches
Shaft Style
Round
Contact Arm Electrical Off Position
Fully ccw-cw
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
Between 165.0 and 175.0
Terminal Location
Radially positioned over less than half the circumference
Mounting Method
Clamp ring
Features Provided
Nonmetallic shaft
Electrical Resistance Per Section
4.25 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section
8.5 percent, rated amperes c and better finish
Electrical Resistance Per Section
4.25 kilohms 2nd section
Electrical Resistance Per Section
8.5 kilohms 1st section
Rotary Actuator Travel In Angular Deg
360.0
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
85.0 all sections
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-300.0/+300.0 all sections
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-300.0 to 300.0 all sections
Power Dissipation Rating Per Section In Watts
4.0 free air all sections
Fixed Tap Quantity Per Section
1 1st section
Tap Location Tolerance Per Section
-1.0/+1.0 ohms 1st section
Tap Location Tolerance Per Section
-1.0 to 1.0 ohms 1st section
Resistance Tolerance Per Section In Percent
-5.0/+5.0 all sections
Resistance Tolerance Per Section In Percent
-5.0 to 5.0 all sections
Actuator Travel Control Feature
Continuous motion
Tap Location From Ccw Terminal Per Section In Ohms
4250.0 1st section
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
55.0 all sections
Standard Taper Curve Per Section
A all sections
Test Data Document
80020-41297 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
7 tab, solder lug