NSN 414743

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.00 henry nominal single component single winding inductance rating, 100.000 single component single winding dc resistance rating in ohms, fully inclosed inclosure type, 300.0 hertz minimum and 5.0 kilohertz maximum all components frequency rating, single phase to single phase second component input-output phase relationship.

NSN 5950-01-013-4181 Datasheet

(NSN) National Stock Number

5950-01-013-4181

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-013-4181

Requires Demilitarization

Yes

(INC) Item Name Code

02918

Date

Wed, Dec 3, 1975

Schedule B Code

8504500000

Dc Resistance Rating In Ohms

100.000 single component single winding

Frequency Rating

300.0 hertz minimum and 5.0 kilohertz maximum all components

Inductance Rating

1.00 henry nominal single component single winding

Inclosure Type

fully inclosed

Input-Output Phase Relationship

single phase to single phase second component

Mounting Facility Quantity

1 single group

Mounting Hole Diameter

0.328 inches nominal single group

Mounting Method

unthreaded hole(s) single group

Overall Height

0.828 inches nominal

Overall Length

1.390 inches nominal

Overall Width

1.359 inches nominal

Primary To Secondary Turn Ratio

1 to 4 second component

Rating Method

electrical single component single winding

Reliability Indicator

not established

Terminal Type And Quantity

6 wire lead

Winding Operating Current

43.0 milliamperes dc nominal single component single winding

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002918

Cross Reference

CAGE Codes

64147

Keystone General Inc

U.s./canadian manufacturers

53292

Pegasus Inc

U.s./canadian manufacturers

05584

Autodyne Manufacturing Co Inc

U.s./canadian manufacturers

80045

L3harris Cincinnati Electronics Corporation

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-01-013-4181?

   The FSCG of the NSN 5950-01-013-4181 is 5950

2. Does the NSN 5950-01-013-4181 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-01-013-4181 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-013-4181 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-01-013-4181 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-013-4181 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Wed, Dec 3, 1975