NSN 48604A

A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.

metal and nonmetallic materials cross-sectional shape style, 0.688 inches nominal bearing surface width, 0.031 inches nominal cross-sectional thickness, 9.063 inches nominal aperture length, 3.500 inches nominal aperture width.

NSN 5330-00-628-3028 Datasheet

(NSN) National Stock Number

5330-00-628-3028

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-628-3028

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Tue, Jan 1, 1963

Aperture Length

9.063 inches nominal

Aperture Width

3.500 inches nominal

Bearing Surface Width

0.688 inches nominal

Cross-Sectional Shape Style

metal and nonmetallic materials

Cross-Sectional Thickness

0.031 inches nominal

Hole Diameter

0.344 inches nominal

Material Document And Classification

unable to decode

Material

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

23382

Fwd Seagrave Holdings Lp

U.s./canadian manufacturers

64104

Dresser, Llc

U.s./canadian manufacturers

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

194120

Questions & Answers

1. What is the FSCG of the NSN 5330-00-628-3028?

   The FSCG of the NSN 5330-00-628-3028 is 5330

2. Does NSN 5330-00-628-3028 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5330-00-628-3028 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5330-00-628-3028 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5330-00-628-3028 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963