NATO Stock Number
5905-00-946-0986
Sold in multiples of
EA
DEMIL
NO
Section Quantity
1
Body Style
Cylindrical servo mounted
Reliability Indicator
Not established
Pilot Diameter
1.8750 inches
Pilot Length
0.0930 inches
Undercut Diameter
1.812 inches
Undercut Width
0.0620 inches
Body Diameter
2.000 inches
Angle Of Mounting Hole In Deg
90.0
Angle Between Centerlines Of Mounting Holes In Deg
120.0
Shaft Diameter
0.250 inches
Shaft Length
0.938 inches
Body Length
2.125 inches
Mounting Lip Diameter
1.8750 inches
Mounting Lip Depth
0.0620 inches
Mounting Hole/stud Circle Diameter
1.000 inches
Shaft Style
Round
Shaft Bearing Type
Bearing
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
3780.0
Maximum Starting Torque
1.30 inch-ounces
Maximum Running Torque
0.90 inch-ounces
Maximum Stop Torque
600.00 inch-ounces
Shaft End Play
0.005 inches
Shaft Runout
0.001 inches
Lateral Runout
0.001 inches
Pilot Diameter Runout
0.001 inches
Shaft Radial Play
0.001 inches
Terminal Location
Longitudinally positioned on the circumference
Mounting Method
Clamp ring
Electrical Resistance Per Section
50.0 kilohms single section
Rotary Actuator Travel In Angular Deg
3600.0
Function Conformity Tolerance Per Section
-0.15/+0.15 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
85.0 single section
Power Dissipation Rating Per Section In Watts
5.0 free air single section
Function Conformity Per Section
Single section independent linearity
Fixed Tap Quantity Per Section
1 single section
Resistance Tolerance Per Section In Percent
-5.0/+5.0 single section
Actuator Travel Control Feature
Continuous motion
Tap Location From Ccw Terminal Per Section In Ohms
25000.0 single section
Function Characteristic Per Section
Single section linear
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
-20.0/+20.0 single section
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
40.0 single section
Test Data Document
25500-501a080-801-107 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
4 tab, solder lug