NSN 507-059NF06G

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

1.377 inches minimum and 1.437 inches maximum center to center distance between mounting facilities parallel to width, 1 cable opening quantity, aluminum alloy material, 0.750 inches nominal cable opening width, 0.938 inches nominal center to center distance between mounting facilities parallel to length.

NSN 5935-01-470-1721 Datasheet

(NSN) National Stock Number

5935-01-470-1721

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-470-1721

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Thu, Dec 9, 1999

Schedule B Code

8548900100

Cable Opening Quantity

1

Cable Opening Width

0.750 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Length

0.938 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

1.377 inches minimum and 1.437 inches maximum

Material

aluminum alloy

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Overall Height

1.100 inches nominal

Overall Length

1.740 inches nominal

Overall Width

1.200 inches nominal

Special Features

emi/rfi; drawing name-adapter, emi/rfi, for hs5687 connectors; no. 2-56 unc-2a screws with lockwashers (4); shrink boot accommodations; individual shield termination; 500 hour salt spray per mil-std-1344

Style Designator

straight type w/flange

Surface Treatment

cadmium

Unthreaded Mounting Hole Diameter

0.086 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

06324

Glenair, Inc.

U.s./canadian manufacturers

8V613

The Boeing Company

U.s./canadian manufacturers

02731

Mcdonnell Douglas Helicopter Co Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Questions & Answers

1. What is the FSCG of the NSN 5935-01-470-1721?

   The FSCG of the NSN 5935-01-470-1721 is 5935

2. Does the NSN 5935-01-470-1721 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-470-1721 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-470-1721 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-470-1721 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-470-1721 was assigned to the Federal Catalog?

   It was assigned 26 years ago, on Thu, Dec 9, 1999