1. Home /
  2. FSC NSN Catalog /
  3. Electrical Connectors /
  4. 51-311-3188

NSN 51-311-3188

Electrical Plug Connector

A washer, usually round, with a centrally-located hole. Its edges and two bearing surfaces are designed in such a way that applied pressure brings into play the spring tension and/or frictional locking principle that materially resists any tendency toward turning. It may be made of one or two pieces.

qq-c-530 fed spec single material response single mating end single contact grouping contact material document and classification, compression nut connector cable strain relief method, spring friction connector locking method, angle, shape, internal coupling body style, 0.116 inches nominal cable entrance diameter.

NSN 5935-00-059-1163 Datasheet

(NSN) National Stock Number
5935-00-059-1163
(FSC) Federal Supply Classification
5935 - Electrical Connectors
(NIIN) National Item Identification Number
00-059-1163
Requires Demilitarization
Yes
(INC) Item Name Code
01938
Date
Tue, Jun 6, 1967
Schedule B Code
8536695050
Body Style
angle, shape, internal coupling
Cable Entrance Diameter
0.116 inches nominal
Connector Cable Strain Relief Method
compression nut
Connector Locking Method
spring friction
Contact Material Document And Classification
qq-c-530 fed spec single material response single mating end single contact grouping
Contact Material
copper alloy single mating end single contact grouping
Contact Position Arrangement Style
nonstd single mating end
Contact Removability
removable single mating end single contact grouping
Contact Maximum Ac Voltage Rating In Volts
400.0 single mating end single contact grouping
Contact Maximum Current Rating In Amps
1.0 single mating end single contact grouping
Contact Maximum Frequency Rating
10000.0 megahertz single mating end single contact grouping
Contact Surface Treatment Document And Classification
mil-g-45204 ty 2,cl 2 mil spec 1st treatment response and mil-c-14550 mil spec 2nd treatment response single mating end single contact grouping
Contact Surface Treatment
gold and copper single mating end single contact grouping
Environmental Protection
heat resistant and cold resistant and moisture resistant and corrosion resistant and pressure proof and vibration resistant and shock resistant
Included Contact Quantity
1 single mating end single contact grouping
Included Contact Type
coaxial socket single mating end single contact grouping
Insert Material Document And Classification
mil-p-19468 mil spec single material response single mating end
Insert Material
plastic polytetrafluoroethylene single mating end
Mating End Quantity
1
Overall Diameter
0.249 inches nominal
Overall Height
0.516 inches nominal
Overall Length
0.625 inches nominal
Precious Material And Location
contact and body surfaces gold
Precious Material And Weight
0.101 gold grains, troy
Precious Material
gold
Radio Frequency Type Contact Characteristic Impedance In Ohms
50.0 single mating end single contact grouping
Shell Material Document And Classification
qq-b-626 fed spec single material response
Shell Surface Treatment Document And Classification
mil-g-45204,ty 2,cl 2 mil spec 1st treatment response and mil-c-14550 mil spec 2nd treatment response
Shell Material
copper alloy
Shell Surface Treatment
gold and copper
Shell Type
solid
Terminal Location
side single mating end single contact grouping
Terminal Type
crimp single mating end single contact grouping

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
G - Item contains gold.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0001938

Cross Reference

CAGE Codes

94117
Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems
U.s./canadian manufacturers
23673
Gamma Scientific Inc
U.s./canadian manufacturers
98291
Itt Cannon Rf Products
U.s./canadian manufacturers
94375
Lax Electronics, Inc. Dba Automatic Connector Div Automatic Connector
U.s./canadian manufacturers
80063
Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
W - Rating variable
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34570
Water Commodity
658 - Electrical appliances, small
National Motor Freight Classification Item Number
061680

Schedule B & Trade

Schedule B
8536-69-5050
Description
electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77258
(NAICS) North American Industrial Classification System
335931

Questions & Answers

  1. What is the FSCG of the NSN 5935-00-059-1163?

    The FSCG of the NSN 5935-00-059-1163 is 5935

  2. Does the NSN 5935-00-059-1163 have a Schedule B code assigned?

    Yes, the Schedule B code is 8536695050

  3. Does NSN 5935-00-059-1163 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5935-00-059-1163 contain precious materials?

    Item contains gold.

  5. Does NSN 5935-00-059-1163 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5935-00-059-1163 was assigned to the Federal Catalog?

    It was assigned 59 years ago, on Tue, Jun 6, 1967

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.