NSN 5189233

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

unable to decode contact material, straight shape threaded body style, bayonet pin connector locking method, unable to decode contact position arrangement style, round w/flat bushing accommodation hole shape.

NSN 5935-01-366-5409 Datasheet

(NSN) National Stock Number

5935-01-366-5409

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-366-5409

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Wed, Oct 28, 1992

Schedule B Code

8538907080

Body Style

straight shape threaded

Bushing Accommodation Hole Shape

round w/flat

Connector Locking Method

bayonet pin

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment

unable to decode

Distance From Mounting Shoulder To Front Face

0.691 inches minimum and 0.707 inches maximum

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Mounting Facility Thickness

0.062 inches minimum and 0.187 inches maximum

Nominal Thread Size

0.875 inches

Overall Diameter

1.360 inches minimum and 1.391 inches maximum

Overall Length

0.820 inches maximum

Polarization Method

key, multiple key groove

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.010 gold grains, troy

Shell Material

aluminum alloy

Shell Surface Treatment

tin and nickel

Shell Type

solid

Terminal Location

unable to decode

Terminal Type

unable to decode

Thread Class

2a

Thread Direction

right-hand

Thread Series Designator

unef

Threaded Device Type

mounting bushing

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

11139

Te Connectivity Corporation Dba Tyco Electronics Corporation Div Deutsch Products

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-366-5409?

   The FSCG of the NSN 5935-01-366-5409 is 5935

2. Does the NSN 5935-01-366-5409 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-366-5409 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-366-5409 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-366-5409 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-366-5409 was assigned to the Federal Catalog?

   It was assigned 33 years ago, on Wed, Oct 28, 1992