NATO Stock Number
5905-00-974-6566
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
1
Body Style
Cylindrical bushing mounted
Reliability Indicator
Not established
Overall Length
1.812 inches
Body Diameter
0.875 inches
Shaft Diameter
0.2498 inches
Shaft Length
1.250 inches
Mounting Bushing Length
0.250 inches
Body Length
1.000 inches
Overall Diameter
1.062 inches
Shaft Style
Round, slotted
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
3600.0
Maximum Starting Torque
0.60 inch-ounces
Maximum Running Torque
0.20 inch-ounces
Maximum Stop Torque
48.00 inch-ounces
Shaft End Play
0.005 inches
Shaft Runout
0.002 inches
Lateral Runout
0.005 inches
Pilot Diameter Runout
0.002 inches
Shaft Radial Play
0.003 inches
Mechanical Backlash In Deg Angular Rotation
1.0
Screw Thread Diameter
0.375 inches
Screw Thread Series Designator
Unef
Screw Thready Qty Per Inch (tpi)
32.0
Terminal Location
Radially positioned over less than half the circumference
Mounting Method
Standard bushing
Features Provided
Shaft seal
Electrical Resistance Per Section
100.0 ohms single section
Rotary Actuator Travel In Angular Deg
3600.0
Function Conformity Tolerance Per Section
-0.20/+0.20 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section
Power Dissipation Rating Per Section In Watts
2.0 free air single section
Function Conformity Per Section
Single section independent linearity
Resistance Tolerance Per Section In Percent
-3.0/+3.0 single section
Actuator Travel Control Feature
Stops
Function Characteristic Per Section
Single section linear
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
-20.0/+20.0 single section
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section
Test Data Document
90099-520c182 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
3 tab, solder lug