NSN 522398

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

pull and push actuator stroke type, 0.788 inches nominal actuator diameter, 0.156 inches nominal actuator width, 0.750 inches nominal actuator length, 1.560 inches nominal body height.

NSN 5945-01-043-0168 Datasheet

(NSN) National Stock Number

5945-01-043-0168

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

01-043-0168

Requires Demilitarization

Yes

(INC) Item Name Code

00310

Date

Sun, Jun 19, 1977

Schedule B Code

8412909080

Actuator Length

0.750 inches nominal

Actuator Diameter

0.788 inches nominal

Actuator Stroke Type

pull and push

Actuator Width

0.156 inches nominal

Body Height

1.560 inches nominal

Body Length

3.430 inches nominal

Body Style

o-frame

Body Width

1.560 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Length

1.000 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

1.187 inches nominal

Duty Type

continuous

Electric Power Rating

12.00 watts nominal

Electrical Resistance

0.65 ohms nominal

Inclosure Type

fully inclosed

Linear Force Delivered

80.00 ounces

Magnetic Coil Quantity

1

Material

plastic case

Mounting Facility Pattern

four position rectangular

Mounting Facility Type And Quantity

4 threaded hole(s)

Nominal Thread Size

unable to decode

Power Takeoff Connection Type

plain-drilled

Terminal Location

top edge near both ends

Terminal Type And Quantity

2 solder stud

Test Data Document

14028-522394-a drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Special Features

solenoid to be furnished by mfr complete with spring and retaining ring and retaining ring groove in plunger

Thread Series Designator

unable to decode

Voltage Rating In Volts

28.0 dc maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0000310

Cross Reference

CAGE Codes

14028

Sypris Electronics, Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35185

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063100

Schedule B & Trade

Schedule B

8412-90-9080

Description

parts of engines and motors, nesoi

End Use

21100 - Industrial engines

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

71899

(NAICS) North American Industrial Classification System

333618

Questions & Answers

1. What is the FSCG of the NSN 5945-01-043-0168?

   The FSCG of the NSN 5945-01-043-0168 is 5945

2. Does the NSN 5945-01-043-0168 have a Schedule B code assigned?

   Yes, the Schedule B code is 8412909080

3. Does NSN 5945-01-043-0168 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-01-043-0168 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5945-01-043-0168 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-01-043-0168 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sun, Jun 19, 1977