NATO Stock Number
5905-00-150-5642
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
1
Body Style
Cylindrical bushing mounted
Reliability Indicator
Not established
Overall Length
2.170 inches
Body Diameter
0.880 inches
Shaft Diameter
Between 0.124 inches and 0.125 inches
Shaft Length
1.530 inches
Mounting Bushing Length
0.250 inches
Body Length
0.520 inches
Overall Diameter
1.240 inches
Shaft Style
Round
Shaft Bearing Type
Sleeve
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
350.0
Maximum Starting Torque
0.30 inch-ounces
Maximum Running Torque
0.25 inch-ounces
Shaft End Play
0.005 inches
Shaft Runout
0.002 inches
Lateral Runout
0.002 inches
Pilot Diameter Runout
0.001 inches
Shaft Radial Play
0.002 inches
Mechanical Backlash In Deg Angular Rotation
0.5
Fragility Factor
Moderately rugged
Screw Thread Diameter
0.375 inches
Screw Thread Series Designator
Unef
Screw Thready Qty Per Inch (tpi)
32.0
Terminal Location
Rear end
Mounting Method
Standard bushing
Cubic Measure
0.316 cubic inches
Electrical Resistance Per Section
5.0 kilohms single section
Rotary Actuator Travel In Angular Deg
360.0
Function Conformity Tolerance Per Section
-1.00/+1.00 single section
Function Conformity Tolerance Per Section
-1.00 to 1.00 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section
Power Dissipation Rating Per Section In Watts
1.0 free air single section
Function Conformity Per Section
Single section terminal base linearity
Resistance Tolerance Per Section In Percent
-3.0/+3.0 single section
Resistance Tolerance Per Section In Percent
-3.0 to 3.0 single section
Actuator Travel Control Feature
Stops
Function Characteristic Per Section
Single section linear
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
-20.0/+20.0 single section
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section
Test Data Document
96214-533590 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
3 turret