NSN 536236-9

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

jackscrew-socket connector locking method, unable to decode contact material document and classification, unable to decode contact position arrangement style, straight type body style, unable to decode contact material.

NSN 5935-01-052-7254 Datasheet

(NSN) National Stock Number

5935-01-052-7254

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-052-7254

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Mon, Dec 19, 1977

Schedule B Code

8538907080

Body Style

straight type

Connector Locking Method

jackscrew-socket

Contact Material Document And Classification

unable to decode

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Surface Treatment Document And Classification

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Mounting Facility Centers

1.800 inches nominal

Environmental Protection

humidity resistant and salt water resistant and shock proof and thermal shock resistant and vibration proof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material Document And Classification

unable to decode

Insert Material

unable to decode

Mating End Quantity

1

Overall Height

0.605 inches nominal

Overall Length

2.050 inches nominal

Overall Width

0.250 inches nominal

Polarization Method

jackscrew

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.024 gold grains, troy

Terminal Location

unable to decode

Terminal Type

unable to decode

Threaded Device Type

coupling facility

Unthreaded Mounting Hole Diameter

0.120 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

07187

Honeywell International Inc. Dba Honeywell International Div Aerospace - Deer Valley Oem

U.s./canadian manufacturers

96214

Raytheon Company Dba Raytheon

U.s./canadian manufacturers

73803

Texas Instruments Inc Metallurgical Materials Div

U.s./canadian manufacturers

10400

Airborn Interconnect, Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-052-7254?

   The FSCG of the NSN 5935-01-052-7254 is 5935

2. Does the NSN 5935-01-052-7254 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-052-7254 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-052-7254 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-052-7254 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-052-7254 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Mon, Dec 19, 1977