NATO Stock Number
5905-00-076-5630
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
3
Body Style
Cylindrical servo mounted
Reliability Indicator
Not established
Pilot Diameter
1.0000 inches
Pilot Length
0.0620 inches
Undercut Diameter
1.880 inches
Undercut Width
0.0570 inches
Body Diameter
2.020 inches
Shaft Diameter
0.2498 inches
Shaft Length
0.450 inches
Body Length
2.500 inches
Mounting Lip Diameter
2.0000 inches
Mounting Lip Depth
0.0930 inches
Shaft Style
Round
Shaft Bearing Type
Ball
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
347.0
Maximum Starting Torque
2.00 inch-ounces
Shaft End Play
0.001 inches
Shaft Runout
0.002 inches
Lateral Runout
0.001 inches
Pilot Diameter Runout
0.001 inches
Shaft Radial Play
0.0008 inches
Terminal Location
Radially positioned over less than half the circumference
Mounting Method
Clamp ring
Electrical Resistance Per Section
10.0 percent, rated amperes c and better select
Electrical Resistance Per Section
10.0 percent, rated amperes c and better finish
Electrical Resistance Per Section
28.0 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section
10.0 kilohms 1st section
Electrical Resistance Per Section
10.0 kilohms 3rd section
Rotary Actuator Travel In Angular Deg
360.0
Function Conformity Tolerance Per Section
-0.50/+0.50 all sections
Function Conformity Tolerance Per Section
-0.50 to 0.50 all sections
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 all sections
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-100.0/+100.0 all sections
Power Dissipation Rating Per Section In Watts
1.0 free air all sections
Function Conformity Per Section
All sections absolute conformity
Resistance Tolerance Per Section In Percent
-5.0/+5.0 all sections
Resistance Tolerance Per Section In Percent
-5.0 to 5.0 all sections
Actuator Travel Control Feature
Continuous motion
Function Characteristic Per Section
All sections table
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
40.0 all sections
Test Data Document
70210-537161 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
9 turret