NSN 60A50-1

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

vswr,kit end item identification.

NSN 6625-01-291-8563 Datasheet

(NSN) National Stock Number

6625-01-291-8563

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-291-8563

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Fri, Jan 6, 1989

Schedule B Code

9030908060

End Item Identification

vswr,kit

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1081669

Cross Reference

CAGE Codes

0T1F7

Anritsu Company

U.s./canadian manufacturers

20944

Wiltron Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

G - 125.0

National Motor Freight Class Rating

G - 125.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35070

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

063035

Schedule B & Trade

Schedule B

9030-90-8060

Description

parts and accessories of articles of schedule b subheading 9030, nesoi

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-291-8563?

   The FSCG of the NSN 6625-01-291-8563 is 6625

2. Does the NSN 6625-01-291-8563 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908060

3. Does NSN 6625-01-291-8563 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-01-291-8563 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-291-8563 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-291-8563 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Fri, Jan 6, 1989