NSN 65A7A3-1

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

internally threaded coupling ring connector locking method, straight shape, internal coupling body style, copper alloy 360 single mating end single contact grouping contact material, compression nut connector cable strain relief method, 0.116 inches nominal cable entrance diameter.

NSN 5935-00-974-5522 Datasheet

(NSN) National Stock Number

5935-00-974-5522

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-974-5522

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Wed, Oct 5, 1966

Schedule B Code

8536695050

Body Style

straight shape, internal coupling

Cable Entrance Diameter

0.116 inches nominal

Connector Cable Strain Relief Method

compression nut

Connector Locking Method

internally threaded coupling ring

Contact Material

copper alloy 360 single mating end single contact grouping

Contact Position Arrangement Style

smc single mating end

Contact Removability

removable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

400.0 single mating end single contact grouping

Contact Maximum Current Rating In Amps

1.5 single mating end single contact grouping

Contact Surface Treatment Document And Classification

mil-g-45204b ty 1,grade c,cl 2 mil spec 1st treatment response and mil-c-14550,cl 4 mil spec 2nd treatment response single mating end single contact grouping

Contact Surface Treatment

gold and copper single mating end single contact grouping

Included Contact Quantity

1 single mating end single contact grouping

Included Contact Type

coaxial pin single mating end single contact grouping

Insert Material

plastic fluorocarbon single mating end

Mating End Quantity

1

Nominal Thread Size

0.190 inches

Overall Diameter

0.234 inches nominal

Overall Length

0.875 inches nominal

Precious Material And Location

contact and shell surfaces gold

Precious Material And Weight

0.105 gold grains, troy

Precious Material

gold

Radio Frequency Type Contact Characteristic Impedance In Ohms

50.0 single mating end single contact grouping

Shell Material

copper alloy 360

Shell Surface Treatment

gold

Shell Type

solid

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

32

Thread Series Designator

unf

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

12848

Solrac Ii Inc

U.s./canadian manufacturers

98291

Itt Cannon Rf Products

U.s./canadian manufacturers

16733

Rfs Technologies, Inc.

U.s./canadian manufacturers

96341

Cobham Advanced Electronic Solutions Inc.

U.s./canadian manufacturers

94117

Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems

U.s./canadian manufacturers

A1997

Elettronica Spa

Non-us manufacturer (nato), other foreign organization or codification bureaus

C3141

Elettronica Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

15280

Northrop Grumman Systems Corporation Div Es Defensive Systems Division

U.s./canadian manufacturers

26916

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Multiple

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

94375

Lax Electronics, Inc. Dba Automatic Connector Div Automatic Connector

U.s./canadian manufacturers

54817

Autek Systems Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

5 - Low sensitivity, category iv, aa&e, unclassified

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-974-5522?

   The FSCG of the NSN 5935-00-974-5522 is 5935

2. Does the NSN 5935-00-974-5522 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-974-5522 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-974-5522 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-974-5522 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-974-5522 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Wed, Oct 5, 1966