NSN 67-06P14-61AS

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

straight shape, internal coupling body style, nonremovable single mating end all contact groupings contact removability, 500.0 single mating end second contact grouping contact maximum ac voltage rating in volts, bayonet latch connector locking method, potting type connector cable strain relief method.

NSN 5935-00-823-4740 Datasheet

(NSN) National Stock Number

5935-00-823-4740

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-823-4740

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Wed, Aug 9, 1967

Schedule B Code

8536695050

Body Style

straight shape, internal coupling

Connector Cable Strain Relief Method

potting type

Connector Locking Method

bayonet latch

Contact Removability

nonremovable single mating end all contact groupings

Contact Maximum Ac Voltage Rating In Volts

500.0 single mating end second contact grouping

Contact Maximum Current Rating In Amps

7.5 single mating end second contact grouping

Contact Maximum Dc Voltage Rating In Volts

700.0 single mating end second contact grouping

Contact Position Arrangement Style

14-61 single mating end

Environmental Protection

moisture resistant and vibration resistant

Included Contact Quantity

1 single mating end first contact grouping

Included Contact Quantity

8 single mating end second contact grouping

Included Contact Type

coaxial socket single mating end first contact grouping

Included Contact Type

round socket single mating end second contact grouping

Insert Material Document And Classification

mil-m-14 mil spec single material response single mating end

Insert Material

plastic phenolic single mating end

Insert Position In Deg

45.0

Mating End Quantity

1

Overall Diameter

1.082 inches nominal

Overall Length

1.687 inches nominal

Polarization Method

key, multiple key groove

Shell Material

aluminum alloy

Shell Surface Treatment Document And Classification

mil-a-8625 mil spec single treatment response

Shell Surface Treatment

anodize

Shell Type

potting

Terminal Location

back single mating end all contact groupings

Terminal Type

solder well single mating end all contact groupings

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

02660

Amphenol Corp Spectra-Strip/itd

U.s./canadian manufacturers

26512

Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Mission Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-823-4740?

   The FSCG of the NSN 5935-00-823-4740 is 5935

2. Does the NSN 5935-00-823-4740 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-823-4740 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-823-4740 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-823-4740 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-823-4740 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Wed, Aug 9, 1967