NSN 70-05237

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

high mobility multi-purpose wheeled vehicle end item identification.

NSN 2540-01-460-3302 Datasheet

(NSN) National Stock Number

2540-01-460-3302

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2540 - Vehicular Furniture and Accessories

(NIIN) National Item Identification Number

01-460-3302

Requires Demilitarization

Yes

(INC) Item Name Code

35520

Date

Tue, Nov 3, 1998

Schedule B Code

8708998175

End Item Identification

high mobility multi-purpose wheeled vehicle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0035520

Cross Reference

CAGE Codes

076M6

Amz Alabama Inc.

U.s./canadian manufacturers

54786

Bae Systems Land & Armaments L.p.

U.s./canadian manufacturers

6W728

Bae Systems Survivability Systems Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

09180

Water Commodity

586 - Vehicle parts, other than automobile

National Motor Freight Classification Item Number

019980

Schedule B & Trade

Schedule B

8708-99-8175

Description

parts and accessories, for motor vehicles of headings 8701 to 8705, nesoi

End Use

30230 - Other parts and accessories of vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

78439

(NAICS) North American Industrial Classification System

336390

Questions & Answers

1. What is the FSCG of the NSN 2540-01-460-3302?

   The FSCG of the NSN 2540-01-460-3302 is 2540

2. Does the NSN 2540-01-460-3302 have a Schedule B code assigned?

   Yes, the Schedule B code is 8708998175

3. Does NSN 2540-01-460-3302 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2540-01-460-3302 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2540-01-460-3302 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2540-01-460-3302 was assigned to the Federal Catalog?

   It was assigned 27 years ago, on Tue, Nov 3, 1998