NSN 7000057748

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

copper alloy single mating end single contact grouping contact material, 1.0 single mating end single contact grouping contact maximum current rating in amps, straight shape body style, 2 rows of contacts non-inserted board single mating end contact position arrangement style, removable single mating end single contact grouping contact removability.

NSN 5935-01-097-4200 Datasheet

(NSN) National Stock Number

5935-01-097-4200

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-097-4200

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Fri, Jul 11, 1980

Schedule B Code

8536695050

Body Style

straight shape

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Maximum Current Rating In Amps

1.0 single mating end single contact grouping

Contact Position Arrangement Style

2 rows of contacts non-inserted board single mating end

Contact Surface Treatment Document And Classification

mil-g-45204,ty 2,cl o mil spec 1st treatment response single mating end single contact grouping

Contact Surface Treatment

gold and nickel single mating end single contact grouping

Included Contact Quantity

10 single mating end single contact grouping

Included Contact Type

hermaphrodite single mating end single contact grouping

Insert Material

plastic polyester single mating end

Mating End Quantity

1

Overall Height

0.630 inches nominal

Overall Length

0.680 inches nominal

Overall Width

0.240 inches nominal

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.010 gold grains, troy

Terminal Location

back single mating end single contact grouping

Terminal Type

tab, solder lug single mating end single contact grouping

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

53387

3m Company Dba 3m

U.s./canadian manufacturers

75037

Minnesota Mining and Mfg Co 3m Company

U.s./canadian manufacturers

76381

3m Company

U.s./canadian manufacturers

D2607

3m Deutschland Gmbh Div 3m Government Services, Europe & Shape/nato Relations

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-097-4200?

   The FSCG of the NSN 5935-01-097-4200 is 5935

2. Does the NSN 5935-01-097-4200 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-097-4200 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-097-4200 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-097-4200 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-097-4200 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Fri, Jul 11, 1980