NSN 7032CHDA2

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

1 coil quantity, 78.123 cubic inches cubic measure, unable to decode center to center distance between mounting facilities parallel to length, air arc quenching method, unable to decode center to center distance between mounting facilities parallel to width.

NSN 5945-01-281-3948 Datasheet

(NSN) National Stock Number

5945-01-281-3948

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

01-281-3948

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Wed, Jun 22, 1988

Arc Quenching Method

air

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Coil Quantity

1

Cubic Measure

78.123 cubic inches

Duty Type

continuous

Fragility Factor

moderately rugged

Frequency In Hertz

50.0 minimum and 60.0 maximum

Main Contact Load Current Rating At Maximum Rated Voltage

unable to decode

Mounting Facility Pattern

unable to decode

Mounting Facility Type And Quantity

4 unthreaded hole(s) single mounting facility

Nonpile-Up Main Contact Arrangement

2 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

3.090 inches maximum

Overall Length

7.480 inches maximum

Overall Width

3.380 inches nominal

Purpose For Which Designed

general

Storage Type

general purpose warehouse

Time Delay

Unthreaded Mounting Hole Diameter

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

89020

Te Connectivity Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Questions & Answers

1. What is the FSCG of the NSN 5945-01-281-3948?

   The FSCG of the NSN 5945-01-281-3948 is 5945

2. Does NSN 5945-01-281-3948 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5945-01-281-3948 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5945-01-281-3948 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5945-01-281-3948 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Wed, Jun 22, 1988