NSN 7265K11

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

28.0 dc at sea level contact voltage rating in volts, breaks before makes each section periphery contact switching action, 5.0 amperes resistive load ac at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts, 5.0 amperes resistive load and 2.5 amperes inductive load and 2.0 amperes lamp load dc at sea level contact load current rating.

NSN 5930-01-032-1880 Datasheet

(NSN) National Stock Number

5930-01-032-1880

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-032-1880

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Dec 10, 1976

Schedule B Code

8536509020

Contact Load Current Rating

5.0 amperes resistive load and 2.5 amperes inductive load and 2.0 amperes lamp load dc at sea level

Contact Load Current Rating

5.0 amperes resistive load ac at sea level

Contact Switching Action

breaks before makes each section periphery

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

Detent Rotational Torque Range

+4.000 to 9.000 inch-pounds single actuator

First Flat Length

0.400 inches minimum and 0.447 inches maximum single actuator

Flat Height

0.216 inches nominal single actuator

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

5

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.469 inches single mounting facility

Nonturn Device Type

slotted bushing at 12:00 oclock

Overall Diameter

1.950 inches maximum

Overall Length

3.651 inches nominal

Pole Quantity

1 each section periphery

Precious Material

silver

Precious Material And Location

terminal screw surface silver

Shaft Diameter

0.247 inches nominal single actuator

Shaft Flat/Slot Angular Location

0.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.531 inches nominal single actuator

Specification/Standard Data

96906-ms25002 government standard

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

8 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Actuator Stop Device Type

adjustable stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

screw

Test Data Document

"81349-mils6807 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a single mounting facility

Thread Length

0.469 inches nominal single mounting facility

Thread Quantity Per Inch

32 single mounting facility

Thread Series Designator

uns single mounting facility

Throw Quantity

8 each section periphery

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

81640

Safran Power Usa, Llc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-032-1880?

   The FSCG of the NSN 5930-01-032-1880 is 5930

2. Does the NSN 5930-01-032-1880 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-032-1880 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-032-1880 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-032-1880 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-032-1880 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Fri, Dec 10, 1976