NSN 7326309

A factory matched set of two or more belts.

0.219 inches minimum and 0.225 inches maximum first leg hole diameter, 0.750 inches nominal first leg corner radius, 90.0 degrees nominal first leg angle, four holes first leg hole arrangement style, 2.086 inches nominal first leg distance from edge to hole center along width.

NSN 5340-01-509-8252 Datasheet

(NSN) National Stock Number

5340-01-509-8252

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-509-8252

Requires Demilitarization

Yes

(INC) Item Name Code

16900

Date

Thu, Jul 3, 2003

Schedule B Code

8302500000

First Leg Angle

90.0 degrees nominal

First Leg Corner Radius

0.750 inches nominal

First Leg Distance From Edge To Hole Center Along Width

2.086 inches nominal

First Leg Hole Arrangement Style

four holes

First Leg Hole Diameter

0.219 inches minimum and 0.225 inches maximum

First Leg Distance Between First And Second Hole Centers Along Width

2.500 inches nominal

First Leg Distance Between Hole Centers Along Width

10.000 inches nominal

First Leg Distance Between Second And Third Hole Centers Along Width

5.000 inches nominal

First Leg Distance From Edge To Hole Center Along Length

0.300 inches nominal

First Leg Style

corner radius

First Leg Thickness

0.375 inches nominal

First Leg Width

16.050 inches nominal

First Leg Length

1.380 inches nominal

Material Document And Classification

astm b308, temper t6 assn std 1st material response and astm b209, temper t651 assn std 2nd material response

Material

aluminum alloy 6061

Mounting Hole Type

plain

Part Name Assigned By Controlling Agency

bracket, mounting, cold plate, pumps

Second Leg Cutout Length

3.250 inches nominal

Second Leg Cutout Width

9.130 inches nominal

Second Leg Distance Between Hole Centers Along Length

2.000 inches nominal

Second Leg Hole Arrangement Style

four holes

Second Leg Hole Diameter

0.404 inches minimum and 0.411 inches maximum

Second Leg Distance Between Hole Centers Along Width

15.000 inches nominal

Second Leg Distance From Edge To Hole Center Along Length

3.750 inches nominal

Second Leg Distance From Edge To Hole Center Along Width

0.525 inches nominal

Second Leg Thickness

0.375 inches nominal

Second Leg Width

16.050 inches nominal

Second Leg Length

5.000 inches nominal

Second Leg Relationship To First Leg

not identical

Second Leg Style

cut out

Special Features

pads are fastened on top side of second leg with screws centered 2.520 and 13.645 from left edge and 1.750 and 3.750 from angle edge; second leg has 2 holes, 0.542-0.549 in diam. centered between each line of screws; second leg's outer edges are rounded to radius of 0.750 and the inner corners to radius of 1.250; items furnished as accessories: al bracket 1; 2ea al pad, 2.00 w w x 2.875 l; 4ea screw, flat head, 100 ctsk (.250) no. 1/4-20 x .750 cres, passivate

Style Designator

angle

Surface Treatment Document And Classification

mil-c-5541, class 1a mil spec single treatment response

Surface Treatment

chromate

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016900

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

31442

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

8302-50-0000

Description

hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal

End Use

41050 - Cell phones and other household goods, n.e.c.

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69919

(NAICS) North American Industrial Classification System

337215

Questions & Answers

1. What is the FSCG of the NSN 5340-01-509-8252?

   The FSCG of the NSN 5340-01-509-8252 is 5340

2. Does the NSN 5340-01-509-8252 have a Schedule B code assigned?

   Yes, the Schedule B code is 8302500000

3. Does NSN 5340-01-509-8252 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-509-8252 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-509-8252 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-509-8252 was assigned to the Federal Catalog?

   It was assigned 23 years ago, on Thu, Jul 3, 2003