NSN 7441835

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

1.312 inches nominal distance between mounting facility centers, 0.984 inches nominal body mounting hole accommodation diameter, top or bottom mount w/metal saddle body style, 26 accommodated contact quantity, concentric contact position arrangement style.

NSN 5935-00-557-4828 Datasheet

(NSN) National Stock Number

5935-00-557-4828

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-557-4828

Requires Demilitarization

Yes

(INC) Item Name Code

28914

Date

Tue, Jan 1, 1963

Schedule B Code

8536695050

Accommodated Contact Quantity

26

Body Mounting Hole Accommodation Diameter

0.984 inches nominal

Body Style

top or bottom mount w/metal saddle

Contact Position Arrangement Style

concentric

Distance Between Mounting Facility Centers

1.312 inches nominal

Fabrication Method

molded

Mounting Hole Diameter

0.144 inches nominal

Mounting Method

saddle

Mounting Hole Style

round, w/two mounting holes

Mounting Type For Which Designed

chassis

Overall Height

0.672 inches nominal

Overall Length

1.594 inches nominal

Overall Width

1.172 inches nominal

Precious Material And Location

contact surfaces silver

Precious Material

silver

Precious Material And Weight

0.026 silver grains, troy

Projection Length Below Mounting Surface

0.281 inches nominal

Specific Equipment Accommodated

electron tube

Terminal Type And Quantity

26 tab, solder lug

Body Material

unable to decode

Contact Material

unable to decode

Contact Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0028914

Cross Reference

CAGE Codes

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

79500

Westinghouse Electric Corp

U.s./canadian manufacturers

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

03538

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

09975

Unisys Corporation Dba Unisys Corp

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-557-4828?

   The FSCG of the NSN 5935-00-557-4828 is 5935

2. Does the NSN 5935-00-557-4828 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-557-4828 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-557-4828 contain precious materials?

   Item contains silver.

5. Does NSN 5935-00-557-4828 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-557-4828 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963