NATO Stock Number
4720-00-909-1984
Sold in multiples of
1 EA
DEMIL
NO
Cross Sectional Shape
Round
Inside Diameter
0.875 inches
Tempurature Rating
-65.0 degrees fahrenheit and 250.0 degrees fahrenheit single response
Flange Thickness
0.297 inches 1st end
Flange Thickness
0.297 inches 2nd end
Outside Diameter
1.031 inches
Minimum Inside Bending Radius
7.375 inches
Exterior Color
Natural
Center To Center Distance Between Bolt Holes Along Width
1.312 inches 2nd end
Center To Center Distance Between Bolt Holes Along Width
1.656 inches 1st end
Center To Center Distance Between Bolt Holes Along Length
1.312 inches 2nd end
Center To Center Distance Between Bolt Holes Along Length
1.656 inches 1st end
Bolt Hole Quantity
4 1st end
Bolt Hole Quantity
4 2nd end
Flange Length
1.750 inches 2nd end
Flange Length
2.188 inches 1st end
Flange Width
1.750 inches 2nd end
Flange Width
2.188 inches 1st end
Connection Style
Raised swivel 1st end
Connection Style
Raised swivel 2nd end
Bolt Hole Diameter
0.205 inches 2nd end
Bolt Hole Diameter
0.266 inches 1st end
Raised Face Height
0.018 inches 1st end
Raised Face Height
0.018 inches 2nd end
Raised Face Diameter
1.500 inches 2nd end
Raised Face Diameter
1.884 inches 1st end
End Flange Construction
Solid 1st end
End Flange Construction
Solid 2nd end
End Connection Design
Straight 1st end
End Connection Design
Straight 2nd end
Connection Type
Raised face flange 1st end
Connection Type
Raised face flange 2nd end
Features Provided
Electrostatic discharge capability
Burst Test Pressure
4000.0 pounds per square inch
Layer Composition And Location
1st layer braided corrosion resistant steel wire and outer layer braided corrosion resistant steel wire
Maximum Operating Pressure
250.0 pounds per square inch
Hydrostatic Test Pressure
2000.0 pounds per square inch
Outer Covering Environmental Protection
Corrosion resistant
Vacuum In Torr
50.8
Inside Surface Condition
Smooth
Measuring Method And Length
25.500 inches working
Flange Style
Rectangular (includes square) 1st end
Flange Style
Rectangular (includes square) 2nd end
Supplementary Features
This item has been reviewed for asbestos material; the current approved sources, 50599, 98441 and 78570 have indicated their part number contained asbestos prior to 1984, they continue to manufacture the same part number without asbestos material after 1984
