NSN 76267

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.0 volts minimum and 32.0 volts maximum dc voltage rating, buoyancy actuation method, 1.0 volts minimum and 220.0 volts maximum ac voltage rating, 1 float quantity, 60.0 hertz nominal frequency rating.

NSN 5930-01-180-3786 Datasheet

(NSN) National Stock Number

5930-01-180-3786

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-180-3786

Requires Demilitarization

Yes

(INC) Item Name Code

37187

Date

Sun, May 27, 1984

Schedule B Code

8413919520

Ac Voltage Rating

1.0 volts minimum and 220.0 volts maximum

Actuation Method

buoyancy

Dc Voltage Rating

1.0 volts minimum and 32.0 volts maximum

Float Quantity

1

Frequency Rating

60.0 hertz nominal

Mounting Method

thread

Mounting Position

vertical

Overall Height

3.000 inches maximum

Overall Length

5.750 inches maximum

Overall Width

3.000 inches maximum

Relay

not included

Test Data Document

"81349-mil-s-16032 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0037187

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

04034

Setra Systems, Inc. Dba Gems Sensors

U.s./canadian manufacturers

80064

Naval Ship Systems Command

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

12189

Metermaster Inc

U.s./canadian manufacturers

21603

Madison Company

U.s./canadian manufacturers

28304

Custom Metering Company Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8413-91-9520

Description

parts, nesoi, of pumps for liquids

End Use

21100 - Industrial engines

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

74291

(NAICS) North American Industrial Classification System

333914

Questions & Answers

1. What is the FSCG of the NSN 5930-01-180-3786?

   The FSCG of the NSN 5930-01-180-3786 is 5930

2. Does the NSN 5930-01-180-3786 have a Schedule B code assigned?

   Yes, the Schedule B code is 8413919520

3. Does NSN 5930-01-180-3786 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5930-01-180-3786 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-180-3786 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-180-3786 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Sun, May 27, 1984