NSN 784407-2

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

straight shape body style, 0.558 inches minimum and 0.566 inches maximum center to center distance between mounting facilities parallel to height, unable to decode contact position arrangement style, friction and latch connector locking method, 3.870 inches minimum and 3.880 inches maximum distance between centerlines of mounting facilities parallel to body width.

NSN 5935-01-210-0116 Datasheet

(NSN) National Stock Number

5935-01-210-0116

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-210-0116

Requires Demilitarization

Yes

(INC) Item Name Code

61925

Date

Thu, Jun 6, 1985

Schedule B Code

8538907080

Body Style

straight shape

Center To Center Distance Between Mounting Facilities Parallel To Height

0.558 inches minimum and 0.566 inches maximum

Connector Locking Method

friction and latch

Contact Position Arrangement Style

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

3.870 inches minimum and 3.880 inches maximum

Distance From Mounting Shoulder To Front Face

0.519 inches minimum and 0.534 inches maximum

Environmental Protection

salt spray proof and thermal shock resistant and vibration resistant and shock resistant and moisture resistant and solvent resistant and fuel resistant

Insert Material Document And Classification

unable to decode

Insert Material

Mating End Quantity

12

Nominal Thread Size

0.138 inches

Operating Temp Rating

-54.0 celsius minimum and 200.0 celsius maximum

Overall Height

1.146 inches minimum and 1.170 inches maximum

Overall Length

1.385 inches maximum

Overall Width

4.300 inches minimum and 4.334 inches maximum

Polarization Method

mating end and guide pin/socket

Shell Material Document And Classification

qq-a-591d fed spec single material response

Shell Material

aluminum alloy 380.0

Shell Surface Treatment Document And Classification

mil-c-26074,cl 3,grade a mil spec single treatment response

Shell Surface Treatment

nickel and copper alloy

Shell Type

solid

Thread Class

2b and 2a

Thread Direction

right-hand

Thread Quantity Per Inch

32 and 40

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

mounting hole

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061925

Cross Reference

CAGE Codes

73030

Hamilton Sundstrand Corporation Dba Collins Aerospace

U.s./canadian manufacturers

71468

Itt Cannon Llc

U.s./canadian manufacturers

55104

Tri-Star Electronics International, Inc. Dba Carlisle Interconnect Div Carlisle Interconnect Technologies

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-210-0116?

   The FSCG of the NSN 5935-01-210-0116 is 5935

2. Does the NSN 5935-01-210-0116 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-210-0116 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-210-0116 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-210-0116 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-210-0116 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Thu, Jun 6, 1985