NSN 800T-D6D2

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

red single actuator actuator color, 120.0 ac maximum voltage rating in volts, 2 tab w/screw terminal type and quantity, unable to decode nonpile-up contact arrangement.

NSN 5930-00-405-6660 Datasheet

(NSN) National Stock Number

5930-00-405-6660

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-405-6660

Requires Demilitarization

Yes

(INC) Item Name Code

00406

Date

Wed, Apr 14, 1971

Schedule B Code

8536509035

Actuator Color

red single actuator

Maximum Voltage Rating In Volts

120.0 ac

Nonpile-Up Contact Arrangement

unable to decode

Terminal Type And Quantity

2 tab w/screw

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000406

Cross Reference

CAGE Codes

01121

Rockwell Automation, Inc.

U.s./canadian manufacturers

25573

Entwistle Co the Kenett Hydraulic Systems Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9035

Description

switches, push-button, rated at over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-405-6660?

   The FSCG of the NSN 5930-00-405-6660 is 5930

2. Does the NSN 5930-00-405-6660 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509035

3. Does NSN 5930-00-405-6660 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-405-6660 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-405-6660 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-405-6660 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Wed, Apr 14, 1971