NSN 8043-1G1

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

2 accommodated contact quantity, 1.187 inches nominal distance between mounting facility centers, in line contact position arrangement style, top mount w/metal saddle and bushings body style, 15.0 contact maximum current rating in amps.

NSN 5935-01-044-5625 Datasheet

(NSN) National Stock Number

5935-01-044-5625

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-044-5625

Requires Demilitarization

Yes

(INC) Item Name Code

28914

Date

Sat, Jul 16, 1977

Schedule B Code

8536695050

Accommodated Contact Quantity

2

Body Style

top mount w/metal saddle and bushings

Contact Position Arrangement Style

in line

Contact Maximum Current Rating In Amps

15.0

Distance Between Mounting Facility Centers

1.187 inches nominal

Ground Terminal Type And Quantity

2 tab, solder lug

Mounting Hole Diameter

0.138 inches nominal

Mounting Method

threaded hole(s)

Mounting Hole Style

two mounting holes/slots, in-line

Mounting Type For Which Designed

chassis

Nominal Thread Size

0.138 inches

Overall Height

0.716 inches maximum

Overall Length

1.570 inches maximum

Overall Width

0.730 inches maximum

Polarization Type

off center hole

Precious Material And Location

contact surface gold

Precious Material

gold

Precious Material And Weight

0.002 gold grains, troy

Projection Length Above Mounting Surface

0.028 inches nominal

Terminal Type And Quantity

2 tab, solder lug

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Body Material

unable to decode

Contact Material

unable to decode

Contact Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0028914

Cross Reference

CAGE Codes

23338

Wavetek U S Inc Div of Wavetek Corp

U.s./canadian manufacturers

00779

Te Connectivity Corporation

U.s./canadian manufacturers

91506

Augat Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-044-5625?

   The FSCG of the NSN 5935-01-044-5625 is 5935

2. Does the NSN 5935-01-044-5625 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-044-5625 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-044-5625 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-044-5625 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-044-5625 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sat, Jul 16, 1977