NSN 8509962-1

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

unable to decode contact material, straight type body style, jackscrew-socket connector locking method, contact material document and classification, unable to decode contact position arrangement style.

NSN 5935-01-331-3147 Datasheet

(NSN) National Stock Number

5935-01-331-3147

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-331-3147

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Mon, Dec 17, 1990

Schedule B Code

8538907080

Body Style

straight type

Connector Locking Method

jackscrew-socket

Contact Material Document And Classification

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment Document And Classification

Contact Surface Treatment

Distance Between Mounting Facility Centers

1.345 inches minimum and 1.355 inches maximum

Environmental Protection

shock resistant and vibration resistant and corrosion resistant and humidity resistant and fungus resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material Document And Classification

Insert Material

unable to decode

Mating End Quantity

1

Nominal Thread Size

0.086 inches

Operating Temp Rating

-65.0 celsius minimum and 125.0 celsius maximum

Overall Height

0.582 inches nominal

Overall Length

1.540 inches minimum and 1.560 inches maximum

Overall Width

0.245 inches minimum and 0.255 inches maximum

Polarization Method

jackscrew

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.024 gold grains, troy

Special Features

jackscrew type-male and location-left handandjackscrew type-female and location-right hand

Terminal Location

unable to decode

Terminal Type

unable to decode

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Quantity Per Inch

56

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

07187

Honeywell International Inc. Dba Honeywell International Div Aerospace - Deer Valley Oem

U.s./canadian manufacturers

59350

Incon Inc Dba Incon Inc

U.s./canadian manufacturers

95238

Winchester Interconnect Corporation Dba Winchester Interconnect Div Winchester Interconnect Rf Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-331-3147?

   The FSCG of the NSN 5935-01-331-3147 is 5935

2. Does the NSN 5935-01-331-3147 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-331-3147 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-331-3147 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-331-3147 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-331-3147 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Mon, Dec 17, 1990