NSN 8520378-3

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode contact position arrangement style, unable to decode included contact quantity, rectangular shape body style, 0.075 inches nominal body height, f-15i end item identification.

NSN 5935-01-445-5372 Datasheet

(NSN) National Stock Number

5935-01-445-5372

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-445-5372

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Wed, Jun 4, 1997

Schedule B Code

8538907080

End Item Identification

f-15i

Body Height

0.075 inches nominal

Body Style

rectangular shape

Contact Position Arrangement Style

unable to decode

Included Contact Quantity

unable to decode

Mating End Quantity

1

Overall Length

0.285 inches nominal

Overall Width

0.170 inches nominal

Special Features

microminiature,rectangular connector,receptacle utilizing socket contacts,a guide pin hole,solder cups,lead wires, and a latch

Terminal Location

unable to decode

Terminal Type

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

07187

Honeywell International Inc. Dba Honeywell International Div Aerospace - Deer Valley Oem

U.s./canadian manufacturers

61873

Omnetics Connector Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-445-5372?

   The FSCG of the NSN 5935-01-445-5372 is 5935

2. Does the NSN 5935-01-445-5372 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-445-5372 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-445-5372 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-445-5372 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-445-5372 was assigned to the Federal Catalog?

   It was assigned 29 years ago, on Wed, Jun 4, 1997