NSN 853112

Two or more insulated conductors (solid or stranded) contained in a common covering, or two or more insulated conductors twisted or molded together without a common covering, or one insulated conductor with a metallic covering, covering, shield, or outer conductor. The rated working voltage of the item must be 300 volts or more, or in lieu of this the test voltage must be 1,000 volts or more; and the size of each individual conductor must be number 18 american wire gage (0.75 square millimeters) or larger. For cables with uninsulated neutral conductor use the hightest rated voltage. Refers to bulk quantities only, for items of definite length with processed ends or terminated in fittings, see cable assembly, power, electrical. For low voltage aircraft and automotive cable, see cable, special purpose, electrical.

w/mtg tabs/flanges, terminal(s) on one surface body style, 0.750 inches nominal body height, 0.250 microfarads single section capacitance value per section, 1.813 inches nominal body length, 1.250 inches nominal body width.

NSN 5910-00-254-3245 Datasheet

(NSN) National Stock Number

5910-00-254-3245

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-254-3245

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Tue, Jan 1, 1963

Schedule B Code

8532250080

Body Height

0.750 inches nominal

Body Length

1.813 inches nominal

Body Style

w/mtg tabs/flanges, terminal(s) on one surface

Body Width

1.250 inches nominal

Capacitance Value Per Section

0.250 microfarads single section

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.125 inches nominal

Features Provided

hermetically sealed case

Mounting Facility Type And Quantity

2 unthreaded mounting holes

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

350.0 ac-rms single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Type And Quantity

2 tab, solder lug

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Unthreaded Mounting Hole Diameter

0.188 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

19315

Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems

U.s./canadian manufacturers

64547

Honeywell International, Inc Div Aerospace-Tucson

U.s./canadian manufacturers

83298

Allied Signal Inc Aerospace Equipment Systems Eatontown Site

U.s./canadian manufacturers

00656

Aerovox Corp.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-254-3245?

   The FSCG of the NSN 5910-00-254-3245 is 5910

2. Does the NSN 5910-00-254-3245 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-254-3245 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-254-3245 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-254-3245 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-254-3245 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963