NSN 862008

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

casehardened casehardening indicator, 1.660 inches nominal body inside diameter, 1.924 inches minimum and 1.928 inches maximum body outside diameter, 0.185 inches nominal flange thickness, 1.250 inches nominal end hole diameter.

NSN 5340-01-259-6519 Datasheet

(NSN) National Stock Number

5340-01-259-6519

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-259-6519

Requires Demilitarization

Yes

(INC) Item Name Code

24327

Date

Sun, Jul 19, 1987

End Hole Diameter

1.250 inches nominal

Body Inside Diameter

1.660 inches nominal

Body Outside Diameter

1.924 inches minimum and 1.928 inches maximum

Casehardening Indicator

casehardened

Flange Thickness

0.185 inches nominal

Material Hardness Rating

88.0 rockwell 15n minimum and 90.0 rockwell 15n maximum

Material

steel

Overall Height

1.000 inches nominal

Style Designator

irregular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0024327

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

83738

Delta Intl Machinery Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

579 - Steel springs, (less than 35 feet)

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-259-6519?

   The FSCG of the NSN 5340-01-259-6519 is 5340

2. Does NSN 5340-01-259-6519 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-259-6519 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-259-6519 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-259-6519 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Sun, Jul 19, 1987