NSN 864612

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

0.188 inches nominal base thickness, 0.250 inches nominal accommodated ferrule diameter, 0.625 inches nominal center to center distance between outside mounting holes along width, clip connected type body style, 1.250 inches nominal accommodated fuse length.

NSN 5920-00-284-6441 Datasheet

(NSN) National Stock Number

5920-00-284-6441

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

00-284-6441

Requires Demilitarization

Yes

(INC) Item Name Code

28908

Date

Tue, Jan 1, 1963

Schedule B Code

8548900100

Accommodated Ferrule Diameter

0.250 inches nominal

Accommodated Fuse Length

1.250 inches nominal

Base Thickness

0.188 inches nominal

Body Style

clip connected type

Center To Center Distance Between Outside Mounting Holes Along Width

0.625 inches nominal

Current Carrying Rating In Amps

30.0

Fuse Accommodation Quantity

6

Fuse Terminal Type Accommodated

ferrule

Internal Circuit Configuration And Pole Quantity

6 pole, mainline, fused

Mounting Hole Diameter

0.188 inches nominal

Mounting Hole Quantity

6

Mounting Hole Style

in-line along the width

Overall Height

0.656 inches nominal

Overall Length

1.625 inches nominal

Overall Width

3.625 inches nominal

Terminal Type And Quantity

12 tab, solder lug

Body Material

unable to decode

Terminal Material

unable to decode

Contact Material

unable to decode

Voltage In Volts

250.0

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0028908

Cross Reference

CAGE Codes

93568

Harsco Corp Bmy-Combat Systems Div

U.s./canadian manufacturers

75915

Littelfuse, Inc.

U.s./canadian manufacturers

71400

Cooper Bussmann, Llc Dba Cooper Industries

U.s./canadian manufacturers

19315

Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems

U.s./canadian manufacturers

99551

Goodrich Corporation Dba Goodrich Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Questions & Answers

1. What is the FSCG of the NSN 5920-00-284-6441?

   The FSCG of the NSN 5920-00-284-6441 is 5920

2. Does the NSN 5920-00-284-6441 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5920-00-284-6441 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5920-00-284-6441 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5920-00-284-6441 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5920-00-284-6441 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963