NSN 86905-1

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

bracket connector cable strain relief method, copper alloy single mating end single contact grouping contact material, removable single mating end single contact grouping contact removability, rectangular shape, insulation body style, friction connector locking method.

NSN 5935-01-147-6959 Datasheet

(NSN) National Stock Number

5935-01-147-6959

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-147-6959

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Mon, Feb 21, 1983

Schedule B Code

8536695050

Body Style

rectangular shape, insulation

Connector Cable Strain Relief Method

bracket

Connector Locking Method

friction

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

300.0 single mating end single contact grouping

Contact Maximum Current Rating In Amps

1.0 single mating end single contact grouping

Contact Position Arrangement Style

2 rows of contacts non-inserted board single mating end

Contact Surface Treatment

gold and nickel single mating end single contact grouping

Environmental Protection

thermal shock resistant and moisture resistant and corrosion resistant and vibration resistant and shock resistant

Included Contact Quantity

26 single mating end single contact grouping

Included Contact Type

square socket single mating end single contact grouping

Insert Material

plastic single mating end

Mating End Quantity

1

Overall Height

0.629 inches nominal

Overall Length

1.480 inches nominal

Overall Width

0.240 inches nominal

Polarization Method

mating end

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.026 gold grains, troy

Terminal Location

back single mating end single contact grouping

Terminal Type

insulation piercing single mating end single contact grouping

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

00779

Te Connectivity Corporation

U.s./canadian manufacturers

05869

Raytheon Company Div Rmd Strategic

U.s./canadian manufacturers

00799

Hubbard Instrument Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-147-6959?

   The FSCG of the NSN 5935-01-147-6959 is 5935

2. Does the NSN 5935-01-147-6959 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-147-6959 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-147-6959 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-147-6959 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-147-6959 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Mon, Feb 21, 1983