NSN 86F123MAB

An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see insulator, (as modified). Excludes:holder, (as modified); retainer, (as modified), and spacer, plate.

2.010 inches nominal body diameter, plain foil anode type, 4.140 inches nominal body length, w/o mtg facilities, terminal(s) on one end body style, aluminum capacitive electrode material.

NSN 5910-00-236-8094 Datasheet

(NSN) National Stock Number

5910-00-236-8094

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-236-8094

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Fri, Mar 12, 1971

Schedule B Code

8532290040

Anode Type

plain foil

Body Diameter

2.010 inches nominal

Body Length

4.140 inches nominal

Body Style

w/o mtg facilities, terminal(s) on one end

Capacitive Electrode Material

aluminum

Capacitance Value Per Section

31000.000 microfarads single section

Case Insulation Material

plastic

Dc Leakage At Reference Temp

4.000 milliamperes

Electrical Polarization

polarized

Equivalent Series Resistance At Reference Temp In Ohms

0.036

Nonderated Operating Temp

-40.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

15.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Type And Quantity

2 threaded hole

Tolerance Range Per Section

-10.00 to 100.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

56699

Bc Components

U.s./canadian manufacturers

01002

General Electric Co Capacitors Div

U.s./canadian manufacturers

06001

General Electric Co Electric Capacitor Product Section

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-236-8094?

   The FSCG of the NSN 5910-00-236-8094 is 5910

2. Does the NSN 5910-00-236-8094 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-236-8094 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-236-8094 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-236-8094 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-236-8094 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Fri, Mar 12, 1971