NSN 87-525082

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1.250 inches nominal center to center distance between mounting facilities parallel to height, straight shape, external coupling body style, bayonet pin connector locking method, unable to decode contact removability, 1.250 inches nominal distance between centerlines of mounting facilities parallel to body width.

NSN 5935-01-417-2109 Datasheet

(NSN) National Stock Number

5935-01-417-2109

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-417-2109

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Thu, Aug 3, 1995

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.250 inches nominal

Connector Locking Method

bayonet pin

Contact Removability

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.250 inches nominal

Distance From Mounting Shoulder To Front Face

0.785 inches minimum and 0.795 inches maximum

Included Contact Quantity

unable to decode

Mating End Quantity

1

Nominal Thread Size

1.188 inches

Overall Height

1.552 inches minimum and 1.573 inches maximum

Overall Length

1.274 inches nominal

Overall Width

1.552 inches minimum and 1.573 inches maximum

Terminal Location

unable to decode

Thread Class

2a

Thread Direction

right-hand

Thread Series Designator

unef

Threaded Device Type

back shell

Unthreaded Mounting Hole Diameter

0.123 inches minimum and 0.133 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

77820

Amphenol Corp Div Amphenol Aerospace Operations

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-417-2109?

   The FSCG of the NSN 5935-01-417-2109 is 5935

2. Does the NSN 5935-01-417-2109 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-417-2109 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-417-2109 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-417-2109 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-417-2109 was assigned to the Federal Catalog?

   It was assigned 31 years ago, on Thu, Aug 3, 1995