NSN 8836K93

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

left position momentary and right position momentary actuator position-action relationship, 0.240 inches nominal actuator diameter, round actuator style, 0.687 inches nominal actuator height, 1.336 inches maximum body length.

NSN 5930-01-265-7785 Datasheet

(NSN) National Stock Number

5930-01-265-7785

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-265-7785

Requires Demilitarization

Yes

(INC) Item Name Code

00184

Date

Sat, Oct 17, 1987

Schedule B Code

8536509065

Actuator Height

0.687 inches nominal

Actuator Diameter

0.240 inches nominal

Actuator Position-Action Relationship

left position momentary and right position momentary

Actuator Style

round

Body Length

1.336 inches maximum

Body Style

bushing mount

Body Width

0.734 inches maximum

Bushing Length

0.469 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

25.000 amperes resistive dc and 15.000 amperes inductive dc and 7.000 amperes lamp dc and 25.000 amperes resistive ac and 15.000 amperes inductive ac and 7.000 amperes lamp ac

Criticality Code Justification

feat

End Item Identification

weapon systems-kidd class ddg; spruance class dd (963); ticonderoga class cg (47)

Hazardous Locations/Environmental Protection

dustproof

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

115.0 ac and 28.0 dc

Mounting Method

threaded bushing

Mounting Surface To Terminal End Distance

1.203 inches maximum

Nominal Thread Size

0.469 inches

Nonpile-Up Contact Arrangement

2 pole, double throw, one position momentary single switch unit

Special Features

weapon system essential

Specification/Standard Data

96906-ms14001 government standard

Terminal Type And Quantity

3 tab, solder lug

Test Data Document

"81349-mil-s-8834 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Quantity Per Inch

32

Thread Series Designator

uns

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000184

Cross Reference

CAGE Codes

81640

Safran Power Usa, Llc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-265-7785?

   The FSCG of the NSN 5930-01-265-7785 is 5930

2. Does the NSN 5930-01-265-7785 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-265-7785 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-265-7785 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-265-7785 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-265-7785 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Sat, Oct 17, 1987