NSN 9017M

An item usually metallic, threaded or unthreaded, used for securing to or positioning into a mating part. It is designed to be used in a globe, relief, regulator valve and the like as a means of controlling the flow of liquids or gases in a given system. One end may have an integral disk or be designed to accommodate a metallic or nonmetallic disk. The other end is designed for a handwheel, lever, spring, diaphragm and the like for nonpowered operation or to accommodate a gear, solenoid, air motor and the like for powered operation. The handwheel and/or disk may be furnished with the item. Excludes:stem, faucet; and stem, needle valve.

consists of: operator console, 1ea; injector powerhead, 1 ea; electronics power cabinet; remote ct auto injector stand, 1ea; 200 ml front loading system, 1 ea; 125 ml breach loading system, 1 ea; operating software; tech manuals; and a standard cable set consisting of: a 7 ft. power cord, a 50 ft. console cable, and a 50 ft. injector head cable. the system has 110/220 vac, 50/60 hz capability but the requisitioner must state their requirements so the correct power cord can be requested for the system. general characteristics item description, memory: 12 pre-stored protocols with up to 4 phases per protocol. interphase delay: 0-255 secs in 1 sec increments; scan delay: 0-99 secs in 1 sec increments w/audible alarm; pressure limit: 25-300 psi in 50 psi increments; flow rate: 0.1-7.2 ml/sec with 200 ml syringe system and 0.1 to 4.9 ml/sec with 125 ml syringe system. volume: 1-200 ml in 1 ml increments; fill speed: approx. from 2-7.2 ml/sec; syringe heater: blanket type...maintains pre-heated contrast at 37 degrees c. special features, ct auto injector system part name assigned by controlling agency.

NSN 6525-01-426-6753 Datasheet

(NSN) National Stock Number

6525-01-426-6753

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6525 - Veterinary Dental Imaging Equipment and Supplies: Medical

(NIIN) National Item Identification Number

01-426-6753

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Fri, Mar 15, 1996

General Characteristics Item Description

consists of: operator console, 1ea; injector powerhead, 1 ea; electronics power cabinet; remote ct auto injector stand, 1ea; 200 ml front loading system, 1 ea; 125 ml breach loading system, 1 ea; operating software; tech manuals; and a standard cable set consisting of: a 7 ft. power cord, a 50 ft. console cable, and a 50 ft. injector head cable. the system has 110/220 vac, 50/60 hz capability but the requisitioner must state their requirements so the correct power cord can be requested for the system.

Part Name Assigned By Controlling Agency

ct auto injector system

Special Features

memory: 12 pre-stored protocols with up to 4 phases per protocol. interphase delay: 0-255 secs in 1 sec increments; scan delay: 0-99 secs in 1 sec increments w/audible alarm; pressure limit: 25-300 psi in 50 psi increments; flow rate: 0.1-7.2 ml/sec with 200 ml syringe system and 0.1 to 4.9 ml/sec with 125 ml syringe system. volume: 1-200 ml in 1 ml increments; fill speed: approx. from 2-7.2 ml/sec; syringe heater: blanket type...maintains pre-heated contrast at 37 degrees c.

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1768554

Cross Reference

CAGE Codes

36109

Liebel-Flarsheim Company Llc

Non-manufacturers

89875

Defense Logistics Agency Directorate of Medical Materiel Defense Supply Center Philadelphia

U.s./canadian manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

656 - X-ray apparatus and equipment

National Motor Freight Classification Item Number

056590

Questions & Answers

1. What is the FSCG of the NSN 6525-01-426-6753?

   The FSCG of the NSN 6525-01-426-6753 is 6525

2. Does NSN 6525-01-426-6753 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6525-01-426-6753 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6525-01-426-6753 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6525-01-426-6753 was assigned to the Federal Catalog?

   It was assigned 30 years ago, on Fri, Mar 15, 1996