NSN 927C835P5

A circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see disk, rupturable. For items made of felt, see felt, mechanical, preformed. For metallic or plastic items with a laminated cross section, see shim. Excludes:diaphragm, valve, flat; diaphragm, valve, special shaped; disk, valve, nonmetallic; filtering disk fluid; and insulator, disk.

unable to decode accommodated finger type, insulated completely electrical insulation feature, 0.400 inches nominal distance between mounting facility centers, 0.5 capacitance in picofarads, terminal mounted body style.

NSN 5935-00-956-3442 Datasheet

(NSN) National Stock Number

5935-00-956-3442

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-956-3442

Requires Demilitarization

Yes

(INC) Item Name Code

15077

Date

Fri, May 20, 1966

Schedule B Code

8548900100

Accommodated Finger Type

unable to decode

Body Style

terminal mounted

Capacitance In Picofarads

0.5

Distance Between Mounting Facility Centers

0.400 inches nominal

Electrical Insulation Feature

insulated completely

Finger Accommodation Diameter

unable to decode

Finger Accommodation Length

unable to decode

Identification Code Color

green

Material

unable to decode

Maximum Voltage Rating In Volts

1200.0 ac

Mounting Facility Type And Quantity

3 terminal

Mounting Leg Length

0.125 inches nominal

Overall Height

0.405 inches nominal

Overall Length

0.485 inches nominal

Overall Width

0.230 inches nominal

Precious Material And Location

contact spring and terminal surfaces gold and contact spring and terminal surfaces silver

Precious Material

gold and silver

Surface Treatment

Terminal Length

0.187 inches nominal

Terminal Type

tab, solder lug

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015077

Cross Reference

CAGE Codes

98291

Itt Cannon Rf Products

U.s./canadian manufacturers

65597

"thales Usa, Inc. Div Air Mobility Solutions ("ams")"

U.s./canadian manufacturers

03538

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

89954

Bae Systems Controls Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-956-3442?

   The FSCG of the NSN 5935-00-956-3442 is 5935

2. Does the NSN 5935-00-956-3442 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-00-956-3442 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-956-3442 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-00-956-3442 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-956-3442 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Fri, May 20, 1966