NATO Stock Number
5930-00-069-3865
Sold in multiples of
1 EA
DEMIL
NO
Thread Class
2a single mounting facility
Thread Length
0.360 inches single mounting facility and 0.390 inches single mounting facility
Overall Length
Between 2.460 inches and 2.490 inches
Overall Height
Between 0.985 inches and 1.015 inches
Overall Width
Between 0.922 inches and 0.952 inches
First Flat Length
0.360 inches single actuator and 0.390 inches single actuator
Flat Height
0.211 inches single actuator and 0.221 inches single actuator
Shaft Diameter
0.247 inches single actuator and 0.250 inches single actuator
Shaft Length
0.860 inches single actuator and 0.890 inches single actuator
Nonturn Device Radius
0.365 inches at 9: 00 o'clock and 0.385 inches at 9: 00 o'clock
Individual Section Quantity
2
Nonturn Device Type
Tab at 9: 00 o'clock
Operating Tempurature Range
-25.0/+85.0 degrees celsius
Operating Tempurature Range
-25.0 to 85.0 degrees celsius
Switch Contact Basic Design
Nonpile-up symmetrical
Pole Quantity
1 each section rear
Throw Quantity
1 each section rear
Mounting Method
Threaded bushing single mounting facility
Thread Size
0.375 inches single mounting facility
Contact Voltage Rating In Volts
110.0 ac at sea level
Contact Voltage Rating In Volts
28.0 dc at sea level
Shaft Flat/slot Angular Location
240.0 degrees from nonturn device single actuator
Switch Actuator Indexing Position Quantity
11 single actuator
Shaft Type
Round, flatted single actuator
Terminal Type
Tab, solder lug
Contact Switching Action
Breaks before makes each section rear
Switch Actuator Positioning Increment
30.0 degrees single actuator
Switch Actuator Stop Device Type
Fixed stop single actuator
Contact Load Current Rating
2.0 amperes resistive load dc at sea level
Contact Load Current Rating
1.0 amperes resistive load ac at sea level
Style Designator
Circular wafer, bushing mount
Test Data Document
49671-992415 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Thread Series Designator
Unef single mounting facility
