NSN 9961053

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.

0.250 inches nominal single actuator first flat length, breaks before makes each section rear contact switching action, 115.0 ac at sea level contact voltage rating in volts, breaks before makes each section front contact switching action, 1.0 amperes resistive load ac at sea level contact load current rating.

NSN 5930-00-755-3601 Datasheet

(NSN) National Stock Number

5930-00-755-3601

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-755-3601

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

Schedule B Code

8536509020

Contact Load Current Rating

1.0 amperes resistive load ac at sea level

Contact Switching Action

breaks before makes each section rear

Contact Switching Action

breaks before makes each section front

Contact Voltage Rating In Volts

115.0 ac at sea level

First Flat Length

0.250 inches nominal single actuator

Flat Height

0.220 inches nominal single actuator

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Pole Quantity

1 first section front

Pole Quantity

1 second section front

Shaft Diameter

0.250 inches nominal single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.560 inches nominal single actuator

Switch Actuator Indexing Position Quantity

10 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.250 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

10 second section rear

Throw Quantity

10 first section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

81073

Grayhill Inc

U.s./canadian manufacturers

19204

Army, United States Department of the Dba Rock Island Arsenal Jmtc

Non-manufacturers

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

04939

Lockheed Martin Corporation

U.s./canadian manufacturers

38597

Lockheed Martin Corporation Div Rotary and Mission Systems

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-755-3601?

   The FSCG of the NSN 5930-00-755-3601 is 5930

2. Does the NSN 5930-00-755-3601 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-755-3601 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-755-3601 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-755-3601 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-755-3601 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963