NSN 9A83952

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

center shield and component retaining device and shock mounts features provided, 8 accommodated contact quantity, lock-in contact position arrangement style, 1.125 inches nominal body mounting hole accommodation diameter, 1.312 inches nominal distance between mounting facility centers.

NSN 5935-00-243-0466 Datasheet

(NSN) National Stock Number

5935-00-243-0466

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-243-0466

Requires Demilitarization

Yes

(INC) Item Name Code

28914

Date

Sun, Jan 1, 1961

Schedule B Code

8536695050

Accommodated Contact Quantity

8

Body Mounting Hole Accommodation Diameter

1.125 inches nominal

Contact Position Arrangement Style

lock-in

Distance Between Mounting Facility Centers

1.312 inches nominal

Features Provided

center shield and component retaining device and shock mounts

Ground Terminal Type And Quantity

4 tab, solder lug

Mounting Hole Diameter

0.140 inches nominal

Mounting Method

saddle

Mounting Hole Style

round, w/two mounting holes

Mounting Type For Which Designed

chassis

Overall Length

1.594 inches nominal

Overall Width

1.188 inches nominal

Special Features

0.719 in.high excluding terminals and contacts

Terminal Type And Quantity

8 tab, solder lug

Contact Material

unable to decode

Contact Surface Treatment

unable to decode and unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0028914

Cross Reference

CAGE Codes

1VPW8

General Dynamics Mission Systems, Inc. Dba Gdms

U.s./canadian manufacturers

94990

Motorola Inc. Dba Integrated Information Systems Group

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-243-0466?

   The FSCG of the NSN 5935-00-243-0466 is 5935

2. Does the NSN 5935-00-243-0466 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-243-0466 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-243-0466 contain precious materials?

   Item contains silver.

5. Does NSN 5935-00-243-0466 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-243-0466 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961