NSN A-5165

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decodeunable to decode functional terminal type and quantity, 4.016 inches nominal body length, metal body material, 2.000 inches nominal body width, 3.500 inches nominal body height.

NSN 5915-01-148-3952 Datasheet

(NSN) National Stock Number

5915-01-148-3952

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-148-3952

Requires Demilitarization

Yes

(INC) Item Name Code

00765

Date

Fri, Mar 4, 1983

Schedule B Code

8527995030

Body Height

3.500 inches nominal

Body Length

4.016 inches nominal

Body Material

metal

Body Width

2.000 inches nominal

Functional Terminal Type And Quantity

unable to decodeunable to decode

Inclosure Type

hermetically sealed

Load Impedance Per Function

unable to decodeunable to decode

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

4 threaded hole(s)

Nominal Thread Size

0.164 inches

Operating Current Rating Per Function In Amps

unable to decodeunable to decode

Operating Temp Range

-4.0 to 55.0 celsius

Operating Voltage Rating And Type Per Function

unable to decodeunable to decode

Overall Length

4.894 inches nominal

Power Line Frequency Rating Per Function In Hertz

unable to decodeunable to decode

Principal Circuitry Type Per Function

unable to decodeunable to decode

Source Impedance Rating Per Function

unable to decodeunable to decode

Style Designator

rectangular terminal/terminals on opposite surfaces

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000765

Cross Reference

CAGE Codes

96238

Dne Technologies, Inc

U.s./canadian manufacturers

13050

Spectrum Control, Inc. Div Api Technologies - Eis/wesson

Non-manufacturers

23939

The Captor Corporation

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-148-3952?

   The FSCG of the NSN 5915-01-148-3952 is 5915

2. Does the NSN 5915-01-148-3952 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-148-3952 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5915-01-148-3952 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5915-01-148-3952 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-148-3952 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Fri, Mar 4, 1983