NSN A8-4144

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.000 quarts quantity within each unit package, liquid physical form, clear color, plastic epoxy material, separate catalyst features provided.

NSN 8040-01-087-3447 Datasheet

(NSN) National Stock Number

8040-01-087-3447

(FSG) Federal Supply Group

80 - Brushes, Paints, Sealers, and Adhesives

(FSC) Federal Supply Classification

8040 - Adhesives

(NIIN) National Item Identification Number

01-087-3447

Requires Demilitarization

Yes

(INC) Item Name Code

11297

Date

Sat, Dec 15, 1979

Color

clear

Features Provided

separate catalyst

Material

plastic epoxy

Physical Form

liquid

Quantity Within Each Unit Package

1.000 quarts

Specific Usage Design

for bonding elastomeric materials to rigid substrates having widely different expansion coefficients

Special Features

use with hysol hd3496 hardener (nsn 8040-00-159-5079)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

Y - Indicates information is in the hazardous materials information resource system (hmirs).

Source of Supply Code

GSA - General services administration washington, d.c. 20406

Pseudo Item Name Code

0011297

Cross Reference

CAGE Codes

04347

Henkel Loctite Corp

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 8040-01-087-3447?

   The FSCG of the NSN 8040-01-087-3447 is 8040

2. Does NSN 8040-01-087-3447 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 8040-01-087-3447 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 8040-01-087-3447 contain hazardous materials?

   Indicates information is in the hazardous materials information resource system (hmirs).

5. When the NSN 8040-01-087-3447 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Sat, Dec 15, 1979