NSN A8267

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

elliptical cam shape, on end cam location, 1.438 inches nominal cam center thickness, 1.750 inches nominal cam overall length, 1 cam quantity.

NSN 2530-00-703-2715 Datasheet

(NSN) National Stock Number

2530-00-703-2715

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2530 - Vehicular Brake, Steering, Axle, Wheel and Track Components

(NIIN) National Item Identification Number

00-703-2715

Requires Demilitarization

Yes

(INC) Item Name Code

10853

Date

Tue, Jan 1, 1963

Schedule B Code

8708300050

Cam Center Thickness

1.438 inches nominal

Cam Location

on end

Cam Overall Length

1.750 inches nominal

Cam Quantity

1

Cam Shape

elliptical

Cam Width

1.125 inches nominal

Drive Type

involute spline

Length

1.750 inches nominal

Material Document And Classification

qq-s-633, fsc1040-canceled fed spec single material response

Material

steel comp 1040

Pitch Diameter

1.4320 inches nominal

Pressure Angle In Deg

30.0

Rotation Direction For Which Designed

clockwise

Shaft Diameter

1.495 inches minimum and 1.497 inches maximum location not otherwise specified

Shaft Length

15.875 inches nominal

Shaft Shank Type

internally threaded hole

Shank Thread Series

unified national coarse (unc)

Spline Quantity

10

Thread Class

2b

Thread Direction

right-hand

Thread Length

0.875 inches nominal

Thread Location

internal

Thread Size Designator

0.312 - 18

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0010853

Cross Reference

CAGE Codes

06853

Bendix Commercial Vehicle Systems Llc Dba Bendix Commercial Vehicle Systems

U.s./canadian manufacturers

04NP0

Contitech Usa, Inc Dba Veyance Technologies

U.s./canadian manufacturers

06144

Industrial Tectonics Bearings Corporation Dba Rbc Bearings Inc Div Industrial Tectonics Bearings

U.s./canadian manufacturers

5RQL2

Drs Environmental Systems Inc

U.s./canadian manufacturers

62707

Dana Corp Spicer Trailer Axle Plant

U.s./canadian manufacturers

73842

Goodyear Tire and Rubber Co the

U.s./canadian manufacturers

80201

Skf Usa Inc. Dba Skf Aerospace Sealing Solutions

U.s./canadian manufacturers

92878

Hdt Expeditionary Systems Inc

U.s./canadian manufacturers

94833

Keco Industries, Inc.

U.s./canadian manufacturers

99643

Eaton Aerospace Llc Dba Eaton Aerospace Jackson

U.s./canadian manufacturers

56697

Standard Forge and Axle Co Inc

U.s./canadian manufacturers

19239

Echlin Inc

U.s./canadian manufacturers

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

08862

Norforge and Machining, Inc

U.s./canadian manufacturers

81535

Aeronautical Communications Equipment Inc

U.s./canadian manufacturers

78500

Meritor Heavy Vehicle Systems, Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08480

Water Commodity

585 - Vehicles and auto supplies

National Motor Freight Classification Item Number

018400

Schedule B & Trade

Schedule B

8708-30-0050

Description

brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705

End Use

30230 - Other parts and accessories of vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

78433

(NAICS) North American Industrial Classification System

336340

Questions & Answers

1. What is the FSCG of the NSN 2530-00-703-2715?

   The FSCG of the NSN 2530-00-703-2715 is 2530

2. Does the NSN 2530-00-703-2715 have a Schedule B code assigned?

   Yes, the Schedule B code is 8708300050

3. Does NSN 2530-00-703-2715 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2530-00-703-2715 contain precious materials?

   Precious metal content is unknown

5. Does NSN 2530-00-703-2715 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2530-00-703-2715 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963