NSN AD943003-9

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

b-52 end item identification, c/o 1 compensator,1 housing,1 ring,1 pole assy,1 spacer,1 magnet; this ietm uses two different torque genator compensators general characteristics item description.

NSN 6605-01-237-4395 Datasheet

(NSN) National Stock Number

6605-01-237-4395

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6605 - Navigational Instruments

(NIIN) National Item Identification Number

01-237-4395

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Thu, Jul 31, 1986

End Item Identification

b-52

General Characteristics Item Description

c/o 1 compensator,1 housing,1 ring,1 pole assy,1 spacer,1 magnet; this ietm uses two different torque genator compensators

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1627477

Cross Reference

CAGE Codes

94580

Honeywell International Inc. Dba Honeywell International Div Aerospace-Minneapolis

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

P - 77.5

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

91810

Water Commodity

732 - Tools, hand and portable, electric

National Motor Freight Classification Item Number

186630

Questions & Answers

1. What is the FSCG of the NSN 6605-01-237-4395?

   The FSCG of the NSN 6605-01-237-4395 is 6605

2. Does NSN 6605-01-237-4395 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

3. Does NSN 6605-01-237-4395 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6605-01-237-4395 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6605-01-237-4395 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Thu, Jul 31, 1986